Non-marking Swivel Caster for Janilink Carpet Extractors
Features:
- Length: 15 feet
- Hose diameter: 1.25 inches
- Solution hose material: Braided stainless steel with a diameter of 1/8 inch
- Equipped with Mytee’s Snap-n-Lok™ conceals and keeps solution hoses clear during cleaning.
- Strainer & filter with check valve
- Mesh filter
- Reduces clogging
Vacuum Motor #1 for JL 500/220 psi Carpet Extractor
- 120V
- 5.7″ 2 STG
- W/ 1″~ 1.5″ Adaptor
Vacuum Motor #1 for JL 500/220 psi Carpet Extractor
- 120V
- 5.7″ 2 STG
- W/ 1″~ 1.5″ Adaptor
Vacuum Motor #2 & #3 for JL 500/220 psi Carpet Extractor
- 120V
- 5.7″ 2 STG
- W/ 1″~ 1.5″ Adaptor
- Hose for to connect the Wand with Janilink’s Carpet Extractors (500PSI, 220PSI, 170PSI)
- 1.5″
- Brass Hex Nipple
- 1/4″ pipe size
- For Janilink brand carpet extractors
- Maximum pressure: 170 psi
- Open flow: 1.4 GPM
- Voltage: 115 VAC
- Maximum current: 1.4 Amps Max
- Maximum pressure: 220 psi
- Open flow: 1.4 GPM
- Voltage: 115 VAC
- Maximum current: 1.6 Amps Max
It perfectly fits Janilink SPC auto scrubbers such as;
– 20″ Battery Powered auto scrubber(SC461)
– 18″ Electric auto scrubber(SC2A)
- RANGE: 0-1000 PSI or 0-70 BAR
- DIAL MEASUREMENT: 2.5″
- CONNECTION TYPE: 1/4 INCH NPT MALE – BRASS
- BODY MATERIAL: STAINLESS STEEL
- INTERNALS: BRASS
- LIQUID FILLED WITH GLYCERIN TO DAMPEN THE EFFECTS OF VIBRATION
AND EXTEND THE LIFE OF THE GAUGE - USEFUL FOR AIR AND WATER APPLICATIONS
- 9.75″ in diameter
- Heavy-Duty Pressure resistant Construction
- Perfect recovery tank lid for Janilink 500, 220, 170, 120 psi extractors
This pump is compataible with the JL Premium I Heated 500 PSI carpet cleaner. Click
HERE to see the JL Premium I Heated 500 PSI carpet cleaner
Description This Drain hose is designed for use with Mytee lite II carpet extractors. The draining hose screws into the backside of the mytee lite where the draining port is. This Accessory makes it very easy to drain dirty water from the recovery…
*Fits all Janilink extractors
The Heat N Run is the only detachable heater on the market for carpet cleaning that mounts on the outside, taking only seconds to attach or remove. Extend the life of your EDIC Galaxy carpet extractor by mounting the Heater on the outside of the…
Description This Foam mesh is designed for use with Mytee lite II carpet extractors. The mesh filters out finer sized particles of dirt and debris then the mesh filter.This filter goes inside in the port of the Mytee lite’s recovery tank.
